Puffco Peak Pro: Complete Usage & Maintenance Guide

Puffco Peak Pro 3DXL

The Puffco Peak Pro is a cutting-edge smart rig designed for concentrate enthusiasts seeking precision, portability, and customization. With features like real-time temperature control, Bluetooth app integration, and wireless charging, it's essential to understand its operation for optimal performance.

📦 What's Included

  • Peak Pro Base
  • Glass Attachment
  • Chamber (Atomizer)
  • Oculus Carb Cap
  • Carb Cap Tether
  • USB-C Charging Cable & Adapter
  • Loading Tool
  • Carrying Case

🔋 Charging Your Device

  1. Connect the USB-C Cable: Plug the provided USB-C cable into the charging port located at the back of the base.

    Charging Indicators:

    • Pulsing White Light: Device is charging.

    • Light Off: Charging complete.

      Charging Duration: Approximately 2 hours for a full charge.

      Battery Check: Triple-click the power button:

    • Green: 100%–60%
    • Yellow: 60%–30%
    • Red: 30%–0%

Note: For wireless charging, use the Peak Pro Power Dock (sold separately). Align the device properly on the dock; a blue light on the dock indicates charging has commenced .

💧 Filling the Glass Attachment

  1. Detach the Glass: Gently pull the glass attachment upward to remove it from the base.

    Add Water: Fill through the mouthpiece until water is just above the internal air holes.

    • Caution: Do not overfill or allow water into the lower section to prevent damage.
  2. Reattach the Glass: Align the inlet hole on the glass with the chamber, insert the front end into the base, then press down the back to secure.

🔥 Operating the Peak Pro

  1. Power On/Off: Press and hold the power button for 3 seconds.

    Select Heat Setting: Single-click the power button to cycle through:

    • Blue: 490°F (Low)
    • Green: 510°F (Medium)
    • Red: 530°F (High)

    • White: 545°F (Peak)

      Load Concentrate:

    • Use the loading tool to place a small amount of concentrate onto the bottom surface of the chamber.
    • Avoid placing material on the sidewalls.
  2. Initiate Heating: Double-click the power button. The device will vibrate and lights will flash 3 times when ready.
  3. Inhale: Draw gently through the mouthpiece. For extended sessions, double-click during use to activate Boost Mode, which increases temperature and extends the session duration.

🌈 Light Indicators & Modes

  • Charging:
    • Pulsing White Light: Charging in progress.

    • Light Off: Fully charged.

      Battery Level Check (Triple-click power button):

    • Green: 100%–60%
    • Yellow: 60%–30%

    • Red: 30%–0%

      Error Codes:

    • 3 White Flashes: No chamber detected.
    • Red-Blue Alternating Flashes: Chamber error.
    • Solid Red for 5 Seconds: Device overheating.
    • 3 Red Flashes: Low battery.
  • Stealth Mode: Rapidly click the power button 4 times to turn off all lights for discreet use.
  • Mood Lighting: Customize LED colors and animations via the Puffco Connect app .

🧼 Cleaning & Maintenance

  1. After Each Use:

    • While the chamber is still warm, use a cotton swab to gently clean any residue.

      Deep Cleaning (Recommended every 10 uses):

    • Chamber: Remove and soak in 91% isopropyl alcohol for 30 minutes. Rinse and let dry completely.
    • Glass Attachment: Soak in isopropyl alcohol or a specialized glass cleaner. Rinse thoroughly and air dry.
  2. Reassembly: Ensure all components are completely dry before reassembling the device.

Note: Regular maintenance ensures optimal performance and extends the lifespan of your device.

📱 Puffco Connect App Integration

Enhance your Peak Pro experience with the Puffco Connect App:

  • Custom Heat Profiles: Set precise temperatures and session durations.
  • LED Customization: Personalize light colors and patterns.
  • Ready Mode: Automatically initiates your preferred heat setting when lifted from the Power Dock.
  • Firmware Updates: Keep your device up-to-date with the latest features.

App Setup:

  1. Download: Available on iOS and Android platforms.

    Pairing:

    • Turn on the Peak Pro.
    • Hold the power button for 6 seconds until the device glows blue.
    • Follow the in-app instructions to complete pairing.

❓ Frequently Asked Questions 💡 Pro Tips
How do I know when the Peak Pro is fully charged?When charging via USB-C, the light will pulse white. Once fully charged, the light turns off. Use the Puffco Connect App to monitor battery levels and receive charging notifications.
Can I use the Peak Pro while it's charging?Yes, but it's recommended to use the device on a full charge for optimal performance. Avoid using third-party chargers to prevent potential damage.
What should I do if my device flashes red and blue?This indicates a chamber error. Ensure the chamber is properly connected and clean. Regularly clean the chamber to prevent errors and maintain performance.
How often should I clean the Peak Pro?Light cleaning after each use and deep cleaning every 10 uses is recommended. Consistent maintenance ensures better flavor and extends device longevity.
What's the purpose of Boost Mode?Boost Mode increases the temperature and extends the session duration. Use Boost Mode for larger dabs or when sharing sessions with others.
Did this answer your question? Thanks for the feedback There was a problem submitting your feedback. Please try again later.